A Series
The Original Self-Closing Safety Gate
Easy to Install – no cutting, welding or drilling. Install in 10 to 15 minutes using simple hand tools
Stainless Steel Spring – our special spring returns gate after each passage
Positive Stop – our adjustment bolts provide positive stop without handrail contact
Variety of Finishes – available in galvanized steel, safety yellow powder coat, stainless steel and aluminum
Installation
FabEnCo Self-Closing Safety Gates can be easily installed in minutes on all types of hand rails (angle, flatbar, pipe) or to existing walls. They can be mounted left or right, on either side of a handrail. The Safety Gate’s stainless steel spring returns after each passage and adjustment bolts provide positive stop without handrail contact.
| Parts | Quantity |
| Hardware Packet | |
| A. U-Bolt* 1 | 1 |
| B. J-Bolt* 1 | 1 |
| C. 1/2” Bolts 2 | 2 |
| D. 1/2” Nuts 4 | 4 |
| E. 3/8” Nuts 2 | 2 |
| F. 3/8” Washers 2 | 2 |
| G. Channels 2 | 2 |
| H. Mounting Plate/Frame Assembly (with 2 adjustable stop bolts) |
1 |
* Use U-Bolt for installation on pipes and J-Bolt for installation on angles.
Step 1 – Insert the U-Bolt (or J-Bolt) through the slot in the Mounting Plate/Frame Assembly. Fasten to the handrail with the 3/8” Washer(s) and 3/8” Nut(s).
Step 2 – Insert the 1/2” Bolts through the set of holes at the desired level on one Channel, then through the Mounting Plate/Frame Assembly. Fasten the 1/2” Nuts onto the 1/2” Bolts and tighten flush against the Mounting Plate/Frame Assembly to stabilize.
Step 3 – Place the second Channel on the other side of the handrail and tighten with the remaining 1/2” Nuts.
Suggested Tools
Adjustable Wrench
Socket Set with 7/8” and 11/16” Sockets
For additional information or assistance, call 1-800-962-6111.
